Abit fatal1ty AA8XE problem

  • Hey - turns out IRC is out and something a little more modern has taken it's place... A little thing called Discord!

    Join our community @ https://discord.gg/JuaSzXBZrk for a pick-up game, or just to rekindle with fellow community members.

SiRiUs13

SiRiUs13

New Member
Jan 23, 2003
528
0
somewhere nowhere
a friend of mine did buy this mainboard with a p4 3.0
he installed the hardware on it and all the little cables like cpu fan, sys fan, ....

but now when he start his pc he gets this msg

Warning CPU has been changed
Please re-enter CPU settings in C-MOS and save before you exit

other problem is:

he starts pc then he got like 30sec and pc shuts down directly
he doesn't have windows installed because he did buy a new HD

and wtf is c-mos
 
  • Like
Reactions: Insp!re
You will usually get that on the first boot of a pc as you need to setup/confirm the cpu speed in the bios

as far as youre concerned cmos = bios (where u do settings for system)

If the pc is shutting down after 30 seconds then it most likely is over heating, either the heatsink is mounted incorrectly or fan isnt on.
 
oke other question
there is a cable with some plastic arround it that says cpu
do u have to stick it between cpu and big coolfan?
maybe thats why its closing after a phew seconds?
 
Dont put anything on top of the cpu heatspreader, put the probe to the side of it. Putting the probe ontop will stop it making contact properly and lead to the thermal shutdown.

I would be very surprised if it didnt show in the manual where to put it
 
  • Like
Reactions: SiRiUs13 and Insp!re
(-Red-) said:
oke other question
there is a cable with some plastic arround it that says cpu
do u have to stick it between cpu and big coolfan?
maybe thats why its closing after a phew seconds?
Click to expand...
sounds like a temp-sensor.. no dont put it between.. and u dont need it if u dont wanna see the temp.. cpus have a built in sensor also.. abd that bios (c-mos) thing is most prolly what mym said..
 
+ make shure cpu fan is connected 2 the powerconnector close 2 cpu.. many mobos have fan rpm check 2 see that cpu fan is running..

+ in bios check if hightemperature shutdown is enabled and if its set way 2 low.. if it has such setting
 
  • Like
Reactions: SiRiUs13
F@TBOY said:
Who is abusing there admin powers?

and why was my post deleted
Click to expand...


non UT forums are for the sole purpose described by the forum name, not for commenting on the posts made without any useful input
 
oke thx all

my m8 did reset his bios and got rid of the warning msg
but his pc allways shuts down

and btw i like to get some bad rep when i ask some help!!!
i don't care about it color if its green or red
this is making me realise that uta isn't dieing its allready dead
so pls go ahead and spam my user cp with red dots
and be man enough to put your name behind
:chicken:
 
  • Like
Reactions: SoldierBoy
You must log in or register to reply here.
Top Bottom
Back